Bi-direction redundancy, 2d scanning mode, Table 6.1 linear security level 1 – Psion Teklogix Schnellstart- Anleitung 7525 User Manual
Page 143: Table 6.2 linear security level 3, Code type length

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
113
Chapter 6: Settings
Options — Decoded (Internal) Scanner
Linear security level 1 specifies that the following code types must be successfully
read twice before being decoded:
Table 6.1 Linear Security Level 1
Linear security level 2 specifies that all types of codes must be successfully read
twice before being decoded.
Linear security level 3 specifies that code types other than the following must be
successfully read twice before being decoded. The following codes must be read
three times:
Table 6.2 Linear Security Level 3
Linear security level 4 requires that all code types be successfully read three times
before being decoded.
Bi-Direction Redundancy
Note: This parameter is only valid if a” Linear Security Level” is enabled.
When this parameter is enabled, a bar code must be successfully scanned in both
directions (forward and reverse) before being decoded.
2D Scanning Mode
(not supported)
When you double-tap on this parameter, a dialog box is displayed in which you can
choose one of the following scanning modes: Smart Raster, Always Raster,
Programmable Raster, Slab Pattern, Cyclone Pattern or Semi-Omni Pattern.
Code Type
Length
Codabar
All
MSI Plessey
4 or less
D 5 of 5
8 or less
I 2 of 5
8 or less
Code Type
Length
MSI Plessey
4 or less
D 2 of 5
8 or less
I 2 of 5
8 or less