Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 180)

Chapter 6: Settings
Security Configuration
150 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Advanced IP
Figure 6.55 Assigning IP Information
The Advanced IP button in the Show Profile and Edit Profile dialog boxes opens
another dialog box that allows you to configure a static IP address as well as the IP
addresses for the primary and secondary DNS server.
6.21.5.2 Security Configuration
The Security Configuration dialog box is called up through the Tools menu.
Note: Security configuration is not available with CDMA modems.
The Security Configuration dialog box allows you to enable, disable and change the
PIN. You will need the current PIN to make any of these changes. The PIN must be
enabled in order to be changed. (If the PIN is disabled, the New PIN entry field is
greyed out.)
Note: Keep in mind that some network operators do not allow the SIM PIN to be
disabled. A new PIN must consist of 4 to 8 numeric digits.
The Require PIN on resume checkbox is independent of the aforementioned
settings. By default, this checkbox is unchecked. While the checkbox remains
unchecked, any PIN entered on startup or through the Security Configuration dialog
box and submitted successfully to the modem is stored in memory for as long as the
device is not rebooted. This stored PIN is then used without further user interaction
whenever the modem requires a PIN (such as resume after suspend or modem