Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 184)

Chapter 6: Settings
Total Recall
154 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Enabled - Automatic Off
When the hand-held enters suspend mode, the modem remains powered up. If the
WORKABOUT PRO is not turned on again during the next 60 minutes, the unit
briefly wakes up from unit mode, shuts down the modem, and enters unit mode
again. This is the default mode.
Enabled - Always On
When the WORKABOUT PRO enters suspend mode, the modem remains
powered indefinitely.
At the cost of a slightly increased power consumption in suspend mode, the modes
where the modem remains powered up during suspend mode have several
advantages. When the unit wakes up from suspend mode the modem is ready
immediately– modem or network initialization is not required. A packet data session
can then remain active during suspend mode. In these modes, the modem is also
able to wake up the hand-held if the network status changes or there is incoming
data on a packet session.
6.22 Total Recall
Total Recall is a Psion Teklogix utility developed to maintain applications and
settings during cold boots. This utility is based on a backup and restore concept.
• Tap on Start, Settings. Tap on the Total Recall icon.
Figure 6.57 Total Recall Screen
In the drop-down menu, you can choose from four options: Create Backup Profile,
View Selected Profile, Restore Selected Profile and Delete Selected Profile. Keep in
mind however that until a profile is created, the only available option is Create
Backup Profile.