Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 328)

Chapter 9: Peripheral Devices & Accessories
The Vehicle Cradle
298 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
9.10 The Vehicle Cradle
Figure 9.19 Unpowered Vehicle Cradle
The vehicle cradle is available in two versions – unpowered (WA1000) and powered
(WA1010). A port replicator option is available for both types of vehicle cradle.
The vehicle cradle is a highly ruggedized, single station dock. Although it provides
quick insertion and removal, the cradle holds the WORKABOUT PRO securely
even when operated in high vibration environments.
9.10.1 Vehicle Cradle Mounting Recommendations
Warning: Before mounting a vehicle cradle in a vehicle, there are a number
of operator safety issues that require careful attention. An improp-
erly mounted cradle may result in one or more of the following:
operator injury, operator visibility obstruction, operator distraction
and/or poor ease of egress for the operator. Psion Teklogix strongly
recommends that you seek professional mounting advice from the
vehicle manufacturer.
Cable routing within a vehicle cab also requires careful consider-
ation, especially for separately tethered scanners and other devices
with loose cables. If you are unable to obtain suitable advice,
contact Psion Teklogix for assistance (see Appendix A: Support Ser-
vices And Worldwide Offices). Note also that for better protection,
the equipment should be mounted inside the vehicle roll cage.