Kawasaki D Series Controller MPVDCONTV113E-3 - Manual (Page 186)

TROUBLESHOOTING
1-183 August 9, 2005
D SERIES CONTROLLER
TROUBLESHOOTING AND COMPONENT REPLACEMENT
Ka a a w s k
ERROR CODE P2011 Invalid disk format.
Incorrect disk format.
⇒
Ensure the disk format is: 2HD, 1.44 MB or 1.25 MB.
_____________________________________________________________________
ERROR CODE P2012 Disk is write protected.
This error occurs when attempting to write to a disk that is write protected.
⇒
Disable the write protection on the floppy disk card.
⇒
Defective floppy disk, floppy disk drive unit, or defective 1KA board.
⇒
Defective local bus harness.
_____________________________________________________________________
ERROR CODE P2013 Disk full.
This error occurs when attempting to write to a floppy disk that does not have enough
free space to complete a save.
⇒
Disable the write protection on the floppy disk.
⇒
Use a floppy disk with free space available.
⇒
Defective floppy disk, floppy disk drive unit, or defective 1KA board.
_____________________________________________________________________
ERROR CODE P2014 Too many files.
This error occurs when the number of files on the floppy disk, or PC card, exceeds the
maximum.
⇒
Use a floppy disk with available free space.
⇒
Defective floppy disk, floppy disk drive unit, or defective 1KA board.
⇒
Defective local bus harness.
_____________________________________________________________________
ERROR CODE P2015 Cannot write on read-only file.
An attempt is made to overwrite or delete a read-only file on a floppy disk or PC card.
⇒
Change the file properties.
_____________________________________________________________________