Konica Minolta 7222 User Manual
Page 95
Output Mode for Machine without Finisher (continued)
3-33
1.
When using Rotation sort or Rotation group mode, load the same paper
size into two trays in different orientation.
Non-sort mode is initially selected. Key Operator can change the initial output
mode. See p. 13-11 to p. 13-12.
2.
Select the desired output mode.
Touch the desired output mode key to highlight it.
To select Non-sort mode, deselect all the keys.
3.
Select additional copy conditions, as desired.
4.
Enter the desired print quantity from the control panel keypad.
• See p. 10-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
5.
Position original(s) FACE UP in the document feeder or FACE DOWN on
the platen glass.
See p. 3-2 to p. 3-6 for details on positioning originals.
6.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray