Konica Minolta 7222 - Manual (Page 114)

Output Mode for Machine with Inner Tray IT-101 (continued)
3-52
4.
Select the desired output mode.
Touch the desired output mode key to highlight it.
To select Non-sort mode, deselect all the keys.
5.
Touch OK.
The Basic Screen will be restored.
6.
Select additional copy conditions, as desired.
7.
Enter the desired print quantity from the control panel keypad.
• See p. 10-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder or FACE DOWN on
the platen glass.
See p. 3-2 to p. 3-6 for details on positioning originals.
9.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the inner tray capacity is exceeded due to the print quantity
selected, remove the copied sets as they exit; otherwise, mishandled
paper will occur.