Konica Minolta 7222 - Manual (Page 297)

13-33
[9] Weekly Timer
This function can be accessed only by the Key Operator after a unique 4-digit Weekly
Timer master key code is entered.
The Weekly Timer is a copier management function that shuts down power to the machine
on a daily or hourly basis, and can be programmed specifically for lunch breaks, weekends
and holidays, or any time the copier is not required.
In Addition, Timer Interrupt can be enabled (with or without a password requirement) to
allow temporary use of the machine during periods when power is shut down by the Timer
function.
Conditions required to use the Weekly Timer:
• The power plug is inserted into the socket.
• The power switch is turned on.
• The current date and time are correctly set.
If the Weekly Timer needs to be activated on your machine, contact your service
representative.
The following Weekly Timer settings can be made.
[1] Weekly Timer Setting
Enable and disable the Timer function.
[2] Weekly Timer Copier ON/OFF Time Set
Specify the times that the copier will turn ON and OFF for each day of the week or the
entire week.
[3] Machine Working Day Individual Set
Specify the working days of the machine by the Timer, for all Mondays through
Sundays, and/or individually for each day of the given month.
[4] Lunch Hour Off Function
Specify the lunch time interval during which the copier will go off and on.
[5] Password Setting
Require Password entry for the Timer off function and establish the amount of usage
time.
NOTES:
1 The time is set in terms of the 24 hour clock, where hour [1] is the first hour
after midnight and hour [24] is the hour of midnight. For example, 6 a.m. is
06:00 hours; 6 p.m. is 18:00 hours.
2 The [AUTO RESET] key is used to change numbers determined by the SET
touch key.
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine
Mail Address