Konica Minolta 7222 - Manual (Page 111)

Making Fold in Copies (Fold / Fold & Stitch) (continued)
3-49
5.
Select additional copy conditions, as desired.
• 2-2 copy mode is also available. Simplex copy mode (1-1 or 2-1) cannot be
selected.
• To release the Booklet selection, touch APPLICATION on the Basic Screen
to display the Application Selection Screen, then touch Booklet to deselect
it.
6.
Enter the desired print quantity from the control panel keypad.
• See p. 10-3 to be sure that the Saddle tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
7.
Position original(s).
When loading originals, heed the following limits on capacity:
Fold mode:
no limit
Fold & Stitch mode: 60 sheets or less (single-sided)
30 sheets or less (double-sided)
Exceeding the above capacity limits may cause trouble in the finisher.
See p. 3-2 to p. 3-6 for details on positioning originals.
8.
Press [START].
Press [STOP] to suspend the scanning or printing job.
When the Saddle tray capacity is exceeded due to the print quantity
selected, remove the copied sets as they exit; otherwise, mishandled
paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Lens Mode
Density
1-1, 2-2
2-1
Staple
Punch
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Copy Size
Fold/
Fold&Stitch
Output with
Inner Tray