Konica Minolta 7222 - Manual (Page 303)

[9] Weekly Timer (continued)
13-39
[4] Lunch Hour Off Function
The Weekly Timer function turns the copier ON and OFF once a day. Use this Lunch hour
off function to shut down power for lunch break then turn on again while the copier is
turned on due to the Weekly Timer function. Only one off-time interval can be
programmed.
Procedure
1 Touch 4. Lunch hour off function to display the Lunch Hour Off Setting Screen.
2 Use the procedure below to activate the Lunch hour off function.
(1) Touch Function ON to highlight it.
(2) Touch off-time.
Enter a 2-digit off-hour (ex. 9 a.m. is 09) and a 2-digit off-minute (ex. 7 min. is 07) using
the control panel keypad.
(3) Touch on-time.
Enter a 2-digit on-hour and a 2-digit on-minute using the control panel keypad.
3 Touch Function OFF to de-activate the Lunch hour off function. The time setting area will
appear grayed out and cannot be selected.
The Function OFF setting is the factory default setting.
4 Touch OK to complete the setting and return to the Weekly Timer Setting Menu Screen.
5 Touch RETURN to restore the System/Copier Setting Menu Screen.
6 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.
Weekly Timer Setting Menu Screen Lunch Hour Off Setting Screen
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine
Mail Address