Konica Minolta 7222 - Manual (Page 40)

Machine Configuration (continued)
2-8
Control Panel Layout
1 POWER SWITCH turns copier power On/Off when pressed.
2 COUNTER displays the Counter List Screen when pressed.
3 LCD TOUCH SCREEN displays machine and copying status, help information,
interactive screens, and touch keys for selecting all functions.
4 CHECK displays a screen showing all settings that are selected for the current job.
5 HELP displays a screen with help for the currently selected function, and access to the
Key Operator Mode Screen.
6 DATA blinks while receiving print data in printer mode, then lights after completing it.
7 PRINT switches the machine operation mode to print.
8 SCAN/SERVER switches the machine operation mode to scan/server.
9 KEYPAD enters numeric values.
10 FAX switches the machine operation mode to facsimile.
11 COPY switches the machine operation mode to copy.
12 INTERRUPT stops copying/facsimile/printing/scanning in progress to allow copying
from the platen glass.
13 POWER SAVER ON/OFF activates power-saving mode for times when the copier is
inactive.
14 STOP stops the copying sequence; deletes the stored memory.
15 PROOF COPY outputs a single set of copies to confirm whether the current settings
are selected properly.
16 START activates copying or scanning.
17 [#] accesses programming modes for setting facsimile and special functions.
18 [C] (CLEAR) allows resetting of print quantity.
19 [ ] accesses facsimile functions.
20 AUTO RESET restores copier to default settings or to Key Operator settings.
1 2 3 4 5 6 7 8 9 10 11 13 12
14 15 16 17 18 19 20 21 22 23