Output mode for machine with inner tray it-101, Output mode for machine with inner tray it-101 -50 – Konica Minolta 7222 User Manual
Page 112
3-50
Output Mode for Machine with Inner Tray IT-101
This section describes the following four output
modes for a copier with the Inner Tray.
The Inner Tray IT-101 is equipped with two exit trays.
The output to Tray 1 in Non-sort mode is initially
selected.
1 Non-sort mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
2 Rotation sort mode rotates every other sorted sets by 90° upon exit, provided the same
paper size is loaded in two trays, one tray with paper loaded in portrait orientation and the
other tray with paper loaded in landscape orientation, e.g., 8.5"x11" and 8.5"x11"R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 Rotation group mode rotates every other grouped set by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in portrait orientation
and the other tray with paper loaded in landscape orientation, e.g., 8.5"x11" and 8.5"x11"R.
Specification for Output Modes with Inner Tray
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet,
Transparency Interleave, Image Insert, Non-Image Area Erase, Repeat, AUTO Layout,
Stamp (Numbering)
❒ Incompatible with Rotation sort mode: Mixed Original, Sheet/Cover Insertion, Booklet,
Transparency Interleave, Non-Image Area Erase, Repeat, AUTO Layout
❒ Incompatible with Rotation group mode: Using platen glass (unless Chapter with
Platen store mode, Image Shift, Upside Down, or Stamp (excluding Numbering) is
used), Proof Copy, Mixed Original, Sheet/Cover Insertion, Booklet, Transparency
Interleave, Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp
(Numbering)