Konica Minolta 7222 - Manual (Page 298)

[9] Weekly Timer (continued)
13-34
How to Access the Weekly Timer Setting Mode
Procedure
1 Touch 9. Weekly timer on the System/Copier Setting Menu Screen.
The Weekly Timer Master Key Code Screen displays when the 4-digit Weekly Timer master
key code is set by service.
Otherwise, the Weekly Timer Setting Menu Screen displays without the code requirement.
2 If the Weekly Timer Master Key Code Screen is displayed, use the touch screen keypad or
control panel keypad to enter your 4-digit Weekly Timer master key code, then touch OK to
display the Weekly Timer Setting Menu Screen.
NOTE:
If an invalid Weekly Timer master key code is entered, continue by entering the
valid 4-digit code.
3 Select the desired Weekly Timer function, and make settings, as required.
4 To exit the Weekly Timer mode, touch RETURN on the Weekly Timer Setting Menu Screen.
5 To exit the Key Operator mode, turn off the machine power.
System/Copier Setting Menu Screen Weekly Timer Master Key Code Screen
Weekly Timer Setting Menu Screen