Konica Minolta 7222 - Manual (Page 82)

Making Double-Sided Copies (1 2, 2 2) (continued)
3-20
Using Platen Glass
Use the platen glass to scan originals unsuitable for the document feeder.
Specification for Double-Sided Copying Using Platen Glass
❒ Use the Platen store mode.
❒ See p. 10-7 for the information on unsuitable RADF originals.
❒ Incompatible Conditions: Using RADF, Non-Standard Size, Transparency Interleave,
Image Insert
1.
Open the document feeder.
The RADF indication on the Basic Screen will disappear and the 1-2 and 2-2 keys will be
dimmed to show inactivity.
2.
Position original FACE DOWN on the platen glass.
Be sure to start from the first page.
• See p. 10-7 for original sizes detectable on the platen glass.
• See p. 3-5 to p. 3-6 for details on positioning originals.
3.
Touch 1 2 on the Basic Screen to highlight it.
The STORE key will be highlighted automatically.
DO NOT press [AUTO RESET] at this point, otherwise the selected mode will
be released and the copier cannot scan the original placed on the glass.
4.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange settings so that they are compatible with the
selected copy mode.
5.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
6.
Press [START] to scan.
The front side image of the double-sided copy will be scanned into memory.