Konica Minolta 7222 User Manual
Page 239
Inserting a New Staple Cartridge into FS-113 Finisher (continued)
11-7
3.
Turn the dial to the left until the two staplers come to the center.
4.
Pull up then forward the staple holder to remove it from the stapler.
Remove each staple holder from both stapler 1 (right) and stapler 2 (left).
5.
Push the two “PUSH” buttons of the staple holder to slide the top cover
upward, then remove the empty staple cartridge.
The staple cartridge cannot be removed from the staple holder if any staples
remain inside the staple cartridge. Do not remove it forcibly, otherwise the
staple holder may be damaged.
1
2
11
Supplies
Empty Trash
Basket(PK-114)
Add Staple
(SK-114)
Add Staple
(FS-114)
Add Toner
Add Staple
(FS-113)
Empty Trash
Basket(FS-113)
This manual is related to the following products: