beautypg.com

Stapling output copies (staple) (continued), Close the radf securely, then press [ auto reset, Touch staple on the basic screen to highlight it – Konica Minolta 7222 User Manual

Page 101

background image

Stapling Output Copies (Staple) (continued)

3-39

1.

Close the RADF securely, then press [AUTO RESET].

Key Operator can change the initial output mode. See p. 13-11 to p. 13-12.

2.

Touch STAPLE on the Basic Screen to highlight it.

The staple position icon will be displayed in the OUTPUT icon area.
Using FS-114, Tray 1 will be initially selected, while the primary (main) tray will be fixed
when using FS-113.
To change the output tray or staple position, follow the procedure below.
If the staple position currently set is desired, proceed to step 4.

3.

Touch OUTPUT on the Basic Screen to display the Output Mode popup
menu.

FS-113:
Touch STAPLE twice to display the Staple Position Selection popup menu.
Select the desired staple position, then touch OK to restore the Output Mode popup
menu.

3

Copying

Operations

Positioning

Originals

Setting Print

Quantity

Stop

Scan/Print

Lens Mode

Density

1-1, 2-2

2-1

Staple

Punch

Multi-Sheet

Bypass Tray

Using

Memory

Output without

Finisher

Output with

Finisher

Copy Size

Fold/

Fold&Stitch

Output with

Inner Tray

This manual is related to the following products: