Konica Minolta 7222 - Manual (Page 203)

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
9-33
7.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.00 (100%) is selected as a
magnification ratio.
• Copy mode is automatically set to 1-1. When selecting 1-2 mode, Platen
store mode will function automatically.
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
9.
Position original FACE DOWN on the platen glass.
See the illustration on p. 9-31 for details.
10.
Press [START].
When the finisher / inner / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
9
Applications
Reverse
Image
Non-Image
Area Erase
Book Copy
Image Insert
Transparency
Booklet
Combination
Chapter
Sheet/Cover
Insertion
Application
Selection Screen
Repeat
Upside Down
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Reduce &
Shift
Stamp
Overlay