beautypg.com

Turning on the power switch, To turn on the power, Turning on the power switch -18 – Konica Minolta 7222 User Manual

Page 50: To turn on the power -18

background image

2-18

Turning On the Power Switch

To Turn On the Power

Usually, the main power switch should be kept ON so that the machine may function as
facsimile or printer.
The main power switch is located on the rear left side of the main body.
When the main power switch is turned ON, the main power indicator located on the far left
side of the control panel will go on.

When turning the main power switch or power switch OFF then ON, wait for 3
seconds or longer before turning it ON again; otherwise the copier may not
function normally.

To turn ON the power by the power switch:

1.

Turn ON the power switch.

The power switch is located on the far left side of the control panel.
Warm-up takes approximately 30 seconds or less.

2.

The Basic Screen will be displayed.

The message on the Basic Screen will inform you that copying job is possible.

This manual is related to the following products: