5] password setting, 5] password setting -40, 9] weekly timer (continued) – Konica Minolta 7222 User Manual

Page 304

[9] Weekly Timer (continued)

13-40

[5] Password Setting

Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.

Procedure

Touch 5. Password setting to display the W.T. Interrupt Password Setting Screen.

Use the touch screen keypad to enter a 4-digit password, and then touch OK to complete
the setting.

NOTE:

When the password setting is 0000, timer interrupt can be used simply by turning
the copier OFF, then ON.

Touch RETURN to return to the Weekly Timer Setting Menu Screen.

Touch RETURN to restore the System/Copier Setting Menu Screen.

If no further changes are required, turn the machine power OFF then ON for normal copying
operations.

Weekly Timer Setting Menu Screen

W.T. Interrupt Password Setting Screen

This manual is related to the following products:

7228