beautypg.com

3] magnification, 3] magnification -9, 2] copier initial (continued) – Konica Minolta 7222 User Manual

Page 273: Procedure

background image

[2] Copier Initial (continued)

13-9

[3] Magnification

Set the magnification ratio you initially want to display after the user turns the power on or
after Auto Reset restores the Initial settings.

NOTICE:

This setting should not conflict with the Initial setting for Paper Tray. For example, if
APS is selected for the initial paper tray setting, a ratio setting other than AMS will
be ignored.

❒ Setting options: AMS; 1.00; ratio 0.25~4.00

Procedure

1

Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 3.
Magnification
to display the Magnification Initial Setting Screen.

2

The default setting is 1.00.
Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already highlighted, touch 1.00.
To select another ratio, touch upper/lower arrow key to display the desired ratio, or enter a
3-digit ratio using the keypad on the control panel.
To select AMS, touch AMS.

3

Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.

4

Touch RETURN to restore the System/Copier Setting Menu Screen.

5

If no further changes are required, turn the machine power OFF then ON for normal copying
operations.

System/Copier Setting Menu Screen

Copier Initial Setting Screen

Magnification Initial Setting Screen

13

Key Operator

Mode

KRDS Host

Density Shift

Application

Customize

List Print

Memory

Switch

Power Save

Touch Panel

Adjustment

Weekly

Timer

Key Operator

Setting

Panel Contrast

Paper Type

Lock Job

Memory

User

Account

Preset Key

Copier Initial

System Initial

Key Operator

Mode

HDD Setting

Menu

Finisher

Adjustment

Machine

Mail Address

This manual is related to the following products: