Konica Minolta 7222 - Manual (Page 280)

13-16
[3] Preset Key
Set two userset density levels and three USER PRESETs of magnification.
[1] Density
Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USER SET 1.
The programmed copy density can be recalled by selecting USER SET 1 on the Basic
Screen.
Procedure
1 Touch 3. Preset key on the System/Copier Setting Menu Screen to display the Preset Key
Setting Menu Screen.
2 Touch 1. Density to display the Userset Density Selection Screen.
3 Place the original on the platen glass or in the RADF.
4 Touch ON to highlight it. The USERSET key will be displayed on the Basic Screen when
restored.
5 Touch Userset1 or Userset2. The Userset Density Darker Setting Screen will be displayed.
6 To program Userset (1 or 2) to a darker
level, perform the following operation,
then proceed to step 7.
(1) Touch the desired number key to
select the density level. If the darker
level sample sheet is desired, touch
No.1 1~4, No.2 5~8, No.3 9~12, or
No.4 13~16, then press [START].
(2) Select the desired darker exposure
from the sample sheet(s), then touch
the density number from 1 to 16.
To program Userset (1 or 2) to a lighter
level, perform the following operation,
then proceed to step 7.
(1) Touch Lighter to display the Userset
Density Lighter Setting Screen.
(2) Touch the desired number key to
select the density level. If the lighter
level sample sheet is desired, touch
No.1 1~4, No.2 5~8, No.3 9~12, or
No.4 13~16, then press [START].
(3) Select the desired lighter exposure
from the sample sheet(s), then touch
the density number from 1 to 16.
Preset Key Setting Menu Screen Userset Density Selection Screen
Userset Density Darker Setting Screen
Userset Density Lighter Setting Screen