Konica Minolta 7222 - Manual (Page 272)

[2] Copier Initial (continued)
13-8
[2] Density
Set Copy density to be effective after power on or after Auto Reset occurs.
❒ Setting options: AES; manual
❒ Default setting: AES on
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 2.
Density to display the Copy Density Initial Setting Screen.
2 Touch AES to select the AES mode, or touch the density level required.
Nine exposure levels are displayed.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.
System/Copier Setting Menu Screen Copier Initial Setting Screen
Copy Density Initial Setting Screen