Konica Minolta 7222 - Manual (Page 57)

Loading Paper (continued)
2-25
Loading Paper in DB-411 Tray
DB-411 tray: Tray 3
1.
Withdraw the DB-411 tray.
See p. 2-2 to check positions of each tray.
Do not withdraw the tray forcibly; otherwise you may be injured.
2.
Stack paper with curl side up.
Load paper, aligning it to the right side of the tray.
The tray bottom will lower due to the stacker paper weight.
• Do not load paper above the right side plate of the tray.
• Be sure that the rear guide plate is correctly positioned according to the
paper size loaded; otherwise machine trouble may occur.
3.
Push in the tray until it locks into place.
The indicator on the tray 3 key will change from “ ” to “ ”.
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size