Konica Minolta 7222 User Manual
Page 196
Reverse the Second Side in 1-2 Mode (Upside Down) (continued)
9-26
2.
Touch Upside Down on the Application Selection Screen.
The Upside Down Screen will be displayed.
3.
Touch the desired binding type key.
4.
Touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Select additional copying features, as desired.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder or FACE DOWN on
the platen glass.
When selecting 2-1 Upside Down mode, use RADF to scan originals.
• See p. 3-2 to p. 3-6 for details on positioning originals.
• Use RADF store mode when the original count exceeds 50 (p. 3-26 to p. 3-
27).
9.
Press [START].
When the finisher / inner / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.