Konica Minolta 7222 - Manual (Page 274)

[2] Copier Initial (continued)
13-10
[4] Tray
Set paper tray priority to be in effect after power is turned on or after Auto Reset occurs.
This function sets tray priority, not paper size priority. Therefore, if paper size is changed in
the tray, the tray will still remain the priority tray.
The initial paper tray setting should not conflict with the initial setting for Lens Mode. For
example, if the initial paper tray setting is APS, the initial setting for paper tray priority will
be ignored.
❒ Setting options: APS; trays 1, 2, 3, 4, LCT (option), or Multi-sheet bypass tray
❒ Default setting: APS on, no specified tray
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 4. Tray
to display the Tray Initial Setting Screen.
2 Touch APS, or touch any tray key to select a specific tray.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.
System/Copier Setting Menu Screen Copier Initial Setting Screen
Tray Initial Setting Screen