Requirements for safe use (continued) – Konica Minolta 7222 User Manual
Page 32
Requirements for Safe Use (continued)
1-14
CAUTION: Disposal of Copier
Do not dispose of this copier yourself. Contact your service representative, who can
arrange for its safe disposal.
If you change the place of installation, please contact your service representative.
CAUTION: Paper Capacity for the Exit Tray
The exit tray capacity is max. 100 sheets. If a copy run of more than 100 is required, be
sure to remove the copies from the exit tray before the maximum capacity is reached.
Failure to do so will cause the copier to jam.
CAUTION: Paper Capacity for the IT-101 Inner Tray
The IT-101 Inner Tray is equipped with two exit trays.
To prevent paper misfeed, do not exceed the paper capacity of the Inner tray.
CAUTION: FS-113 Finisher Paper Capacity
The FS-113 Finisher is equipped with two exit trays.
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
CAUTION: FS-114 Finisher Paper Capacity
The FS-114 Finisher is equipped with two exit trays, which may be increased to three or
four trays by installing the optional BK-114 Branch kit and/or SK-114 Saddle kit.
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
CAUTION: FS-113 Finisher Primary (Main) Tray
When printed materials are removed from the primary (main) tray of the Finisher, the tray
goes up automatically. To avoid injury, DO NOT put your hand on top of the printed sheets.
Be sure to hold both sides of the printed sheets when removing them, and DO NOT leave
your hand on the printed sheets while the primary tray goes up.