Konica Minolta 7222 - Manual (Page 42)

Machine Configuration (continued)
2-10
Basic Screen
The Basic Screen displays when copying operation becomes available after warm-up.
1 SETTING key is selected when the screen displays basic copying conditions.
Touch this key to return to the current print job settings when making selections for a
reserve job.
When any trouble occurs during a reserve setting, “SETTING” changes to flashing
“JAM” or “ADD PAPER” according to the problem. See p. 5-7 to p. 5-9.
2 Icon area displays the following icons.
: ADD TONER icon is displayed when toner supply becomes low.
: PM icon is displayed when preventive maintenance is due.
: RADF icon is displayed when the RADF is used in a copying operation.
: HDD Ready icon is displayed when the optional HD-103 Type A Hard
Disk is mounted to show the status of the hard disk.
3 Date/Time indicator displays the current date and time.
4 RESERVE key is touched to select copy conditions for a subsequent job while the
current scan/print job is in progress.
5 Message area displays the machine status and procedure required at that time.
6 Job No. icon is displayed when [START] is pressed to start a reserve job of that
number.
Your service representative can set the machine to display the page count while
scanning the originals, and also the copy count when printing job starts, instead of the
job number.
3 Date/Time
indicator
2 Icon area
19 DENSITY setting area
20 OUTPUT
setting area
21 Output icon area
18 MODE setting area
16 LENS setting area
15 STORE key
14 Rotation OFF key
13 APPLICATION key
12 ORIGINAL MODE key
17 SIZE setting area
1 SETTING key
5 Message area
6 Job No. icon
7 Original counter
9 Count/Set indicator
8 Document Folder key
4 RESERVE key
10 Memory indicator
11 JOB LIST key