Konica Minolta 7222 - Manual (Page 56)

Loading Paper (continued)
2-24
2.
Stack paper with curl side up.
Load paper, aligning it to the right side of the tray.
• Do not load paper above the red line on the side guide plates.
• Be sure that the rear guide plate is correctly positioned according to the
paper size loaded; otherwise machine trouble may occur.
3.
While pressing the release knob, move the side guide plate against the
paper.
Release the release knob to lock the slide guide plate.
Do not change the paper size indication of the size indication dial at the front of
the tray.
Copying using a tray with a different size indicated may cause a paper misfeed.
4.
Push in the tray until it locks into place.
The indicator on the tray key will change from “ ” to “ ”.