beautypg.com

Chapter 1: outline, Chapter 1 outline – Sharp JW-20CM User Manual

Page 9

background image

1

·

1

Chapter 1 Outline

Using network module JW-20CM, you can construct a communications system (satellite net) which

can easily send and receive an ON/OFF signal (machine information) and numerical data (production

data) between PCs and a host computer using equipment control.

Using remote I/O slave module JW-20RS, you can construct a remote I/O system as master station for

PC that installed JW-20CM.

PCs which can use JW-20CM and JW-20RS are W70H/100H, JW50/70/100, and JW50H/70H/100H.

Data link/computer link function

This function enables to send and receive ON/OFF signals and numeric data between modules on

a network (satellite net) which is connected PCs and personal computers having network module

ZW-20CM/JW-20CM/JW-22CM, network module ZW-98CM/ZW-20AX, and satellite net board Z-

335J.

Remote I/O function

If remote I/O slave module ZW-20RS/JW-20RS are mounted on I/O modules located separately,

one PC having a network module JW-20CM can control these slave modules. (Connectable

maximum 63 modules of slave stations.)

· In the remote I/O function, the remote I/O can choose either of synchronous or asynchronous for

sending and receiving data with slave stations.

Synchronous type:

Slave station scans input/output operation one time for each operation of

the PC.

Asynchronous type: When PC's operation time is longer than data transfer required time of the

remote I/O, the slave station scans input/output operation one time for each

operation of the PC. When PC's operation time is shorter than the data

transfer required time of the remote I/O, the slave station operate input and

output one time for several operation of the PC.

Remote programming/remote monitor function

By constructing a satellite system using the JW-20CM, you can program and monitor other station’s

PC’s (master station’s PC in case that remote I/O function) on the satellite system using a support

tool.

· These remote programming and remote monitor functions are also available beyond one

hierarchical layer difference (satellite net

satellite net, satellite net

SUMINET-3200).

* “SUMINET-3200” is a trademark of Sumitomo Electric Industries, Ltd.

This manual is related to the following products: