Sharp JW-20CM - Manual (Page 27)

6 · 4
10 mm 0.5 mm
A: 10 0.5 mm
B: 4 0.5 mm
B A
Screw holder
Blade cassette
Cut the internal conductor of the coaxial cable,
which is already cut by the stripper, using a nipper
etc. to the optimum dimension of 4 mm.
Hold up the upper section of the screw holder with
a minus driver, and open the screw holder.
Remove the blade cassette and reinsert by turning
the current blade back side front or insert a new
blade cassette from its top.
We recommend that in order to keep the adjusted
position of the adjustment screws, after completion
of adjustment for the coaxial cable and the screw
holder, write the screw position etc. on a sticker
and adhere it to the adjustment screws.
From the previous page
KADAEA
KEDAADFS
KA
E A CA
DA
AD FS FG
HH
G