Sharp JW-20CM - Manual (Page 141)

9 · 43
From the previous page
Write 000200
(8)
in parameter ad-
dresses 004004 to 004005
(8)
.
Write 000
(8)
(=00
(H)
) in parameter address 004006
(8)
.
Write 00004 (D) (offset 4) in parameter addresses
004010 to 004011
(8)
.
Write 00
(H)
in parameter address 004012
(8)
.
Write 80
(H)
(the top address is not same as the
master station) in parameter address 004007
(8)
.
Write 80
(H)
(offset valid) in parameter address 004013
(8)
.
Screen display of JW-13PG
Lower
Upper
File number
Set top address of register link area on the master station
Set on the parameter address (004400 to 004403
(8)
) in the file address
(8)
. These top addresses
should not overlap the register link area, flag area, or any area used by other option modules.
004400 (8)
004401 (8)
004402
(8)
004403
(8)
• In case of setting 0400 (file address 000400
(8)
) in parameter addresses 004400 to 004403
(8)
and
set 0 (file number) in 004402
(8)
. (Example for page 9·41).
Write 000400
(8)
after converting to octal.
Write file no 0 in parameter address 004402
(8)
.
Display the contents of parameter addresses 004400 to
004401
(8)
Screen display of JW-13PG
To the next page
Slave
station
02
Slave
station
01
Convert to
octal figures
Convert to hexa-
decimal figures
04011 HEX 00
04012 HEX 00
I PARAM.
>04013 HEX 80
04400 OCT 000
04401 OCT 001
I PARAM.
>04402 OCT 000
File address: OCT (octal), word
File number: HEX (hexadecimal) , bytes.
File address
Word
display
Byte
display