Sharp JW-20CM User Manual

Page 72

• Remote I/O operation (communication) stops.
• The PC continues operation. (Mode 1)
• Only normal slave stations will continue

operation (communication).

• The PC continues operation. (Mode 2)
• Remote I/O operation (communication) stops.
• The PC also stops operation. (Mode 0)
• Remote I/O operation (communication) stops.
• The PC continues operation. (Mode 1)
• Only normal slave stations will continue

operation (communication).

• The PC continues operation. (Mode 2)
• Remote I/O operation (communication) stops.
• The PC continues operation. (Mode 1)
• Only normal slave stations will continue

operation (communication).

• The PC continues operation. (Mode 2)

001

002

004

005

006

011

012

014

015

016

From the previous page

Set remote I/O operation mode

[OCT (octal, word)]

· Set operation method of the remote I/O into parameter address 000000

(8)

Set value

(8)

Asynchronous

Synchronous

Asynchronous

Synchronous

· Concerning the contents of "synchronous" and "asynchronous" communications, see page 8·4

"Communication timing."

Set "slave station operation at error: mode 0" and "communication method: synchronous"

and "address allocation: manual"

To the next page

Display the
contents of
000000

(8)

Screen display of JW-13PG

After converting to octal
notation, write it at 014

(8)

17776 OCT 000
17777 OCT 000

I PARAM.
>00000 OCT 014

Operation method

Communication

method

Allocation of I/O address

Fixed allocation

Manual allocation

Operation when a slave station error occurs

This manual is related to the following products:

JW-20RS