Sharp JW-20CM - Manual (Page 107)

9 · 9
(2) Data memory starting system
The data memory starting system is the system which starts the SEND/RECEIVE functions without
using exclusive instructions. Set the target station number, data memory address, etc. on the
specified data memory (communication information storage area).
You can increase the amount of data to be transferred in one SEND/RECEIVE operation using
multiple connected channels.
For cases using 1 channel alone, maximum 256 bytes
For cases using 2 connected channels, maximum 512 bytes
For cases using 3 connected channels, maximum 768 bytes
For cases using 4 connected channels, maximum 1024 bytes
Set these channel connections on the parameter (address 007700 to 007703
(8)
). (See page 9·27
and 48)
[Setting the contents in a communication information storage area]
In order to assign a communication information storage area (64 bytes), set the top address on the
parameter (address 007710 to 007713
(8)
).
V5
FLAGS
TIMER
TYPE
ST1
R_SL
ST2
n (L)
n (H)
ADR_A(L)
ADR_A(H)
SEG_A
Not used
ADR_B(L)
ADR_B(H)
SEG_B
Not used
0
+01
+02
+03
+04
+05
+06
+07
+10
+11
+12
+13
+14
+15
+16
+17
+20
+37
+40
+57
+60
+77
The contents of each area (16 bytes) in channel CH1 to CH3
are the same as the contents of CH0.
64 bytes
G
Address
(8)
Channel CH0 (16 bytes)
Channel CH1 (16 bytes)
Channel CH2 (16 bytes)
Channel CH3 (16 bytes)