Sharp JW-20CM - Manual (Page 2)

Thank you for purchasing the network module (JW-20CM), remote I/O slave module (JW-20RS) for the
SHARP programmable controller.
Read this manual thoroughly to completely familiarize yourself with the operation according to the
examples.
Besides this manual, the manuals of control module, support tool, and option module are available for the
respective programmable controller.
We ask you to also read these manuals as well as this manual.
Keep this manual for future reference. We are confident that this manual will be helpful whenever you
encounter a problem.
This manual describes the JW-20CM, JW-20RS with 30Hn mark in front of the module. The
following functions are added for the JW-20CM and JW-20RS without [30Hn] marks.
This module can be communicated with JW30H.
For data link, available for use the following functions.
· Data link (memory capacity save function)
· Data memory start system for SEND/RECEIVE function.
In this manual, additional functions are represented by the V5 mark.
In this manual, programmable controller is referred to as “PC.”
In this manual, programmable controllers and I/O modules with model name "ZW-xx" are
referred to as "ZW model," and programmable controllers and I/O modules with model name
"JW-xx" are referred to as "JW model."
· This manual is written with the utmost care.
· No part of this manual may be reproduced in any form without permission of SHARP corporation.
· The contents of this manual are subject to change without prior notice.
Note
Note