Sharp JW-20CM - Manual (Page 28)

6 · 5
6-2 Connector crimping procedure
Required tools: Hand-held crimping tool
Connector: ME-GP-01
Processing procedure
Connector parts
Shell Sleeve Contact
Contact
A: 10 0.5 mm
B: 4 0.5 mm
B A
Sleeve
Crimping dice
Contact
Crimping dice
Insulator
Put a contact into dice having a
diamond shape and closely stick its
end surface with the insulator and the
dice. Pull the moving frame to the
fixing frame side and crimp until the
ratchet is removed.
(Crimping width: 2.2 mm)
* Use the crimping tool in the direction
shown in the illustration right.
Using the crimping tool in the reverse
direction will not crimp correctly.
Put through a sleeve to an end-processed high
frequency coaxial cable.
Insert a contact into the internal conductor and crimp.
Fixing frame
: ME-42H
: 67-42H
: 10 mm
Model
Dice No.
Crimping width
Internal conductor
Moving frame
Closed
contact
To the next page
Widen a little Crimp Dice blade shape
2.2 mm
Closed contact