Sharp JW-20CM - Manual (Page 195)

11 · 8
Set “standard” in network configuration.
Set “satellite net” or “SUMINET” in target station model.
Set the target station number (00 to 77
(8)
).
Set “extension” in network configuration.
Set “satellite net” or ”SUMINET” in junction station model.
Set the target station number (00 to 77
(8)
).
(In the case of the above figure: 02
(8)
)
Set the junction station number (00 to 77
(8)
).
(In the case of the above figure: 12
(8)
)
Set the junction station rack number.
(Keep the initial value “0”)
Set the station slot number.
Set the installed slot number of the master
station on the target station side. In the case
of the above figure: 3.
Satellite net
Slot number
Satellite net
Target station
0 1 2 3
01 (8)
00 (8)
10 (8)
12 (8)
(Junction station)
02 (8) 03 (8)
(JW-50PG)