SANRAD I3.1.1205 - Manual (Page 72)

4-20 SANRAD V-Switch CLI User Manual
Viewing iSCSI Portals
You can view all created portals using the CLI command iscsi portal
show
.
iscsi portal show
Table 4-5: iSCSI Portals
Protocol Address Type Address Port
6 ipv 4 212.199.43.56 3260
6 ipv 4 212.199.43.57 3260
6 ipv 4 212.199.43.66 5003
6 ipv 4 212.199.43.67 5003
Protocol 6 is the transport protocol for iSCSI. Address type IPv 4 designates a
four byte IP address.
Removing iSCSI Portals
You can remove an iSCSI portal using the CLI command iscsi portal
remove
. Only after all iSCSI portals related to an IP address are removed from
a port can the IP address be removed from the port. If you are working in a
cluster, the portal must be removed from both V-Switch databases. For more
information on V-Switch clusters, see “
Introduction to V-Switch Clusters ”.
iscsi portal remove
You need to define two parameters to remove an iSCSI portal:
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS IP ADDRESS OF
NETWORK PORT
MANDATORY 212.199.43.67
-p TCP PORT TCP PORT FOR
I SCSI
COMMUNICATION
OPTIONAL
DEFAULT : 3260
5003