SANRAD I3.1.1205 - Manual (Page 144)

7-26 SANRAD V-Switch CLI User Manual
ip radius add
You need to define three parameters to add a RADIUS server IP to the RADIUS
client
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-ip IP ADDRESS IP ADDRESS OF
RADIUS SERVER
MANDATORY 212.199.43.2
-p PORT UDP PORT OPTIONAL 1812
-k KEY SHARED SECRET
BETWEEN
RADIUS
SERVER AND V-
S WITCH
MANDATORY DataTurnsMeOn
Example:
In Figure 7-17, the V-Switch is configured to relay CHAP challenges to the
identity, accounting, from the user, steven, to the RADIUS server. The V-
Switch is configured to communicate with the RADIUS server through port
1812 to IP address 212.199.43.2. The V-Switch – RADIUS key is
DataTurnsMeOn.
The user password is not configured on the V-Switch. The RADIUS server
authenticates the user password and sends the results back to the V-Switch.
acl identity add chap –id accounting –user steven
–radius
ip radius add –ip 212.199.43.2 –p 1812 –k DataTurnsMeOn