SANRAD I3.1.1205 User Manual
Page 321
Appendix: Sample Configurations
A-21
STEP 11.
C
REATE MIRRORED VOLUMES
(RAID
0)
Use the CLI command
volume create mirror
to create a mirrored
volume, Mirror1, from simple volumes Simple1 and Simple2.
volume create mirror –vol Mirror1 –nbc 2 –ch
Simple1 –ch Simple2
Use the CLI command
volume create mirror
to create a mirrored
volume, Mirror2, from simple volumes Simple3 and Simple4.
volume create mirror –vol Mirror2 –nbc 2 –ch
Simple3 –ch Simple4
STEP 12.
C
REATE
S
TRIPED VOLUME
(RAID
1)
Use the CLI command
volume create striped
to create a striped
volume, Stripe1.
volume create striped –vol Stripe1 –nbc 2 –sus 64
–ch Mirror1 –ch Mirror2
STEP 13.
C
REATE I
SCSI
TARGET AND
LUN
After creating the final virtual volume configuration that you want to expose
to the network hosts, you need to create an iSCSI target for the volume as
well as attach LUN0 to the target volume. Use the CLI command
volume
expose -new
to create the iSCSI target and attach LUN0 to the striped
volume, Stripe1.
volume expose -new –vol Stripe1 –ta storage –tn
billing.sanrad –device VSwitch
STEP 14.
C
ONFIGURE HOST STATION INITIATOR
Open the Microsoft iSCSI initiator program on host station 1.