SANRAD I3.1.1205 - Manual (Page 228)

11-14 SANRAD V-Switch CLI User Manual
ip route add
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-dip DESTINATION IP IP OF HOST
STATION
MANDATORY 10.10.20.20
-dmask DESTINATION
MASK IP MASK OF HOST
STATION
MANDATORY 255.255.255.0
-gw GATEWAY IP
ADDRESS
IP ADDRESS OF THE
GATEWAY ROUTER
MANDATORY 30.30.20.20
-if INTERFACE
ALIAS NETWORK PORT TO
OPEN
COMMUNICATION
THROUGH MANDATORY eth2
Example:
An IP routing path to Network D, IP 10.10.20.20, (IP mask 255.255.255.0) is
mapped from network port Eth2 through router gateway 30.30.20.20.
ip route add –dip 10.10.20.20 –dmask 255.255.255.0 –gw
30.30.20.20 –if eth2
ip route show
This command shows all IP routes on a V Switch.
ip route show
Dest IP
Address
Dest Mask Interface Gateway
10.10.20.20 255.255.255.0 Eth2 30.30.20.20
10.12.40.40 255.255.255.0 Eth3 20.22.11.11
ip route remove
This command removes an IP route from a network port.
ip route remove