SANRAD I3.1.1205 - Manual (Page 102)

6-10 SANRAD V-Switch CLI User Manual
Disk 3 Disk 7 Disk 8
100
67
JBOD 1 JBOD 2
Disk 4
Disk 2 Disk 5 Disk 6 Disk 1
Subdisk 1
Figure 6-5. Disk 1 with 1 Subdisk
After creating the subdisk, you can use the CLI command subdisk show to
view it and all configured subdisks. You can use the CLI command subdisk
details
to view the details of the created subdisk.
subdisk details
You need to define one parameter to view subdisks.
S WITCH P ARAMETER D EFINITION S TATUS E XAMPLE
-d DISK ALIAS ALIAS OF DISK TO
SHOW SUBDISKS
FROM OPTIONAL
USE THIS
SWITCH TO LIST
ONLY THE
DETAILS OF A
SPECIFIC DISK
Disk1
This command calls up the following table.
Table 6-4: Details of all Subdisks
Disk Subdisk Start Address Length Vol
Disk1 Subdisk1 0 512 no