SANRAD I3.1.1205 - Manual (Page 325)

Appendix: Sample Configurations A-25
1
Eth 1: 212.199.43.41
Eth 1: 212.199.43.56
10235
V Switch 1 V Switch 2
Fibre Channel
Connection
Eth 1: 212.199.43.42
2
Cloud
IP address:
212.199.43.40
Eth 1: 212.199.43.75
Disk 1 Disk 2
Disk 4 Disk 3
2 2
1
Initiator Target:
212.199.43.56
Etherne
t
LAN B
Initiator Targets:
212.199.43.75
212.199.43.56
Tower box Host 2
IP address:
212.199.43.70
Tower box Host 1
IP address:
212.199.43.50
Telnet
Station
JBOD 1
Figure A-15. Cluster Topology
STEP 1.
ATTACH CABLES
Attach an HSSDC-DB9 fibre channel cable from your JBOD appliance to one
of the storage ports on the back panel of V-Switch 1. See #1 in Figure
A-15. Depending on your appliance, you need to plug a terminator into one
of the JBOD ports.
Attach an RJ45 copper 1 Gbit Ethernet cable from the Ethernet port Eth1
on the front panel of V-Switch 1 to your Telnet terminal. See #2 in Figure
A-15. Attach another RJ45 copper 1 Gbit Ethernet cable from the Ethernet
port Eth1 on the front panel of the second V-Switch, Vswitch2, to your
Telnet terminal.