Isns, Deleting an isns server – SANRAD I3.1.1205 User Manual
Page 70
4-18
SANRAD V-Switch CLI User Manual
iSNS
The V-Switch supports Internet Storage Name Service (iSNS) protocol for
advertising its targets and portals on the iSNS server to enable iSCSI initiators
in the IP-SAN to locate the V-Switch targets automatically. Use the CLI
command ip isns add to add an iSCSI server to the V-Switch’s iSNS client.
Targets defined by the V-Switch’s Access Control List (ACL) as having
controlled access are accessible only to those servers defined as having access to
the target. See “
Volume Exposure & Security
”.
ip isns add
You need to define one parameter to add an iSNS server address:
S
WITCH
P
ARAMETER
D
EFINITION
S
TATUS
E
XAMPLE
-ip
IP
ADDRESS
IP
ADDRESS OF
I
SNS
SERVER
MANDATORY
212.199.43.1
Use the CLI command ip isns show to view all added iSCSI server
addresses.
ip isns show
Table 4-4: iSNS
Servers
212.199.56.45
Deleting an iSNS Server
Use the CLI command ip isns remove to remove an iSNS server from the V-
Switch iSNS client.
ip isns remove
You need to define one parameter to remove an iSNS server address:
S
WITCH
P
ARAMETER
D
EFINITION
S
TATUS
E
XAMPLE
-ip
IP
ADDRESS
IP
ADDRESS OF
I
SNS
SERVER
MANDATORY
212.199.43.1