SANRAD I3.1.1205 - Manual (Page 116)

6-24 SANRAD V-Switch CLI User Manual
Disk 3 Disk 4
Simple 2
Disk 1
Simple 1
Simple 4
Simple 3
Disk 2
Simple 8
Disk 5
Simple 7
Simple 10
Disk 6
Simple 9
Disk 7 Disk 8
10
06
2
Simple 5 Simple 6 Simple 11 Simple 12
JBOD 1 JBOD 2
Mirrored
Volume 2
Mirrored
Volume 3
Figure 6-17. Second Mirrored Volume of RAID 10
If you are working in
a V-Switch cluster,
this volume must be
configured on both
V-Switches.
Finally, in Figure 6-18, a striped volume, Stripe 2, is created using the two
mirrored volumes as children: Mirror 2 and Mirror 3. The striped unit size
is 100 blocks, meaning that in each read/write function, 100 blocks of data
are read/written first into Mirror 2 then Mirror 3 and then back to Mirror
2 until the end of the data chunk.
volume create stripe –vol Stripe2 –sus 100 –ch Mirror2 –ch
Mirror3