SANRAD I3.1.1205 - Manual (Page 56)

4-4 SANRAD V-Switch CLI User Manual
Initial V-Switch Configuration
The V-Switch has a default IP Address of 10.11.12.123. This allows you to set
initial startup parameters via a telnet session.
Assigning a Management IP Address
Mgnt port is only for
V-Switch 3000.
The management IP address can be set via:
ƒ RS-232 port
ƒ Telnet session
ƒ LCD Buttons (only for V-Switch 3000)
Telnet/SSH Connection
To initialize the V-Switch via telnet/SSH session:
1. Change your computer’s IP Address to anything on the same subnet
10.11.12.*
2. Connect to the management port on the V-Switch.
3. Telnet to 10.11.12.123.
4. Enter Username and Password: sanrad.
You will be asked to accept or change the default values for :
1. Set the default IP Address.
2. Set the default IP Mask.
3. Set the default V-Switch name.
4. Set the default management port (Mgnt or ETH1).