SMSC LAN9311i - Manual (Page 400)

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
Revision 1.4 (08-19-08) 400 SMSC LAN9311/LAN9311i
DATASHEET
14.5.3.29 Switch Engine Ingress Rate Read Data Register (SWE_INGRSS_RATE_RD_DATA)
This register is used to read the ingress rate table registers.
Register #: 184Eh Size: 32 bits
BITS DESCRIPTION TYPE DEFAULT
31:16 RESERVED RO -
15:0 Data
This is the read data from the ingress rate table registers as specified in the
Switch Engine Ingress Rate Command Register
(SWE_INGRSS_RATE_CMD)
. Refer to Section 14.5.3.26.1, "Ingress Rate
Table Registers," on page 397 for details on these registers.
RO 0000h