Switch engine, Once, Switch engine ingress – SMSC LAN9311i User Manual
Page 395: Rate configuration register (swe_ingrss_rate_cfg), Section 14.5.3.25, Datasheet
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
395
Revision 1.4 (08-19-08)
DATASHEET
14.5.3.25
Switch Engine Ingress Rate Configuration Register (SWE_INGRSS_RATE_CFG)
This register, along with the settings accessible via the
Switch Engine Ingress Rate Command Register
, is used to configure the ingress rate metering/coloring.
Register #:
184Ah
Size:
32 bits
BITS
DESCRIPTION
TYPE
DEFAULT
31:3
RESERVED
RO
-
2:1
Rate Mode
These bits configure the rate metering/coloring mode.
00 = Source Port & Priority
01 = Source Port Only
10 = Priority Only
11 = RESERVED
R/W
00b
0
Ingress Rate Enable
When set, ingress rates are metered and packets are colored and dropped
if necessary.
R/W
0b
This manual is related to the following products: