Section 14.5.3.27, Switch engine ingress rate command status, Register (swe_ingrss_rate_cmd_sts) – SMSC LAN9311i User Manual
Page 398: Indicates, Switch, Datasheet
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
Revision 1.4 (08-19-08)
398
SMSC LAN9311/LAN9311i
DATASHEET
14.5.3.27
Switch Engine Ingress Rate Command Status Register (SWE_INGRSS_RATE_CMD_STS)
This register indicates the current ingress rate command status.
Register #:
184Ch
Size:
32 bits
BITS
DESCRIPTION
TYPE
DEFAULT
31:1
RESERVED
RO
-
0
Operation Pending
When set, indicates that the read or write command is taking place. This bit
is cleared once the command has finished.
RO
SC
0b
This manual is related to the following products: