Switch engine diffserv table write data register, Swe_diffserv_tbl_wr_data), Section 14.5.3.13 – SMSC LAN9311i User Manual

Page 382: Datasheet

Text mode
Original mode

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Datasheet

Revision 1.4 (08-19-08)

382

SMSC LAN9311/LAN9311i

DATASHEET

14.5.3.13

Switch Engine DIFFSERV Table Write Data Register (SWE_DIFFSERV_TBL_WR_DATA)

This register is used to write the DIFFSERV table. The DIFFSERV table is not initialized upon reset
on power-up. If DIFFSERV is enabled, the full table should be initialized by the host.

1812h

Size:

32 bits

BITS

DESCRIPTION

TYPE

DEFAULT

31:3

RESERVED

2:0

DIFFSERV Priority
These bits specify the assigned receive priority for IP packets with a ToS/CS
field that matches this index.

R/W

000b

This manual is related to the following products:

LAN9311