Datasheet – SMSC LAN9311i User Manual
Page 233
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
233
Revision 1.4 (08-19-08)
DATASHEET
Note 14.8
The default value of this field is determined by the BP_EN_strap_2 configuration strap. The
strap values are loaded during reset and can be re-written by the EEPROM Loader. Once
the EEPROM Loader re-writes the values, this register is updated with the new values.
See
Section 4.2.4, "Configuration Straps," on page 40
for more information.
Note 14.9
The default value of this bit is determined by multiple strap settings. The strap values are
loaded during reset and can be re-written by the EEPROM Loader. Once the EEPROM
Loader re-writes the values, this register is updated with the new values. Refer to
6.2.3, "Flow Control Enable Logic," on page 58
for additional information.
Note 14.10
The default value of this field is determined by the FD_FC_strap_2 configuration strap. The
strap values are loaded during reset and can be re-written by the EEPROM Loader. Once
the EEPROM Loader re-writes the values, this register is updated with the new values.
See
Section 4.2.4, "Configuration Straps," on page 40
for more information.
Note 14.11
The default value of this field is determined by the manual_FC_strap_2 configuration strap.
The strap values are loaded during reset and can be re-written by the EEPROM Loader.
Once the EEPROM Loader re-writes the values, this register is updated with the new
values. See
Section 4.2.4, "Configuration Straps," on page 40
for more information.